Farnell AP60-50 Autoranging kraftförsörjning
Farnell AP60-50 Autoranging Power Supply
Begär en offert
Farnell AP60-50 är en 1kW autoranging DC-kraftförsörjning med 0-60V/0-50A utgång, erbjudande CV/CI-operation, GPIB-kontroll och fjärrgivning för bänk- och systemapplikationer.
Produktinformation
| Modell | AP60-50 |
| Tillverkare | Farnell |
| Kategori | Strömförsyningar och elektroniska belastningar |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Översikt
Farnell AP60-50 är en 1kW autoranging DC-kraftförsörjning som levererar 0-60V på 0-50A inom en konstant effekthölje. Dess effektiva switchmode-design erbjuder flexibla spännings- och strömkombinationer, vilket gör den idealisk för både fristående bänkanvändning och systemintegration. Enheten stöder konstant spänning (CV) eller konstant ström (CI) operation med högprecisions programmering och återläsning.
Huvudfunktioner
- 1kW strömutgång: 0-60V/0-50A intervall med autoranging spännings-/strömkombinationer
- Konstant spänning eller konstant strömoperation: Automatisk begränsning till förinställda värden
- IEEE 488.2 GPIB-gränssnitt: Manuell eller buskontroll med högupplösningsprogrammering
- Fjärrgivning: Upprätthåller reglering vid lasten över avstånd upp till 0,5V drop per ledare
- Master/Slave-operation: Upp till fyra enheter kan anslutas för ökad effekt eller spänning
- Digitala LED-panelmätare: Realtids spännings- och strömvisning
- Rack-monterbar design: Kompakt switchmode-topologi för systemintegration
- Spänningssteg: 20mV, Strömsteg: 12,50mA
Tillämpningar
- Bänkprövning och komponentutveckling
- Systemintegration och automatisering
- Laboratorieskraftförsörjning för F&U
- Produktprövning och validering
Specifikationer
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP60-50 | 20mV12.50mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP60-50 | 0-60V/0-50A |
Begär en offert
Farnell AP60-50 Autoranging kraftförsörjning
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt