Farnell AP60-150 Autoranging kraftförsörjning
Farnell AP60-150 Autoranging Power Supply
Begär en offert
Farnell AP60-150 är en 3kW autoranging DC-kraftförsörjning som levererar 0-60V/0-150A med konstant spänning eller strömlägen, GPIB-gränssnitt och fjärrgivning.
Produktinformation
| Modell | AP60-150 |
| Tillverkare | Farnell |
| Kategori | Strömförsyningar och elektroniska belastningar |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Översikt
Farnell AP60-150 är en 3kW autoranging DC-kraftförsörjning som kan leverera 0-60V på 0-150A inom en konstant effekthölje. Med effektiv switchmode-topologi erbjuder den flexibla spännings- och strömkombinationer lämpliga för både bänkanvändning och systemintegration. Enheten erbjuder konstant spänning (CV) eller konstant ström (CI) driftlägen med högprecisions programmering och återläsningskapacitet.
Huvudfunktioner
- 3kW strömutgång: 0-60V/0-150A intervall med autoranging spännings-/strömkombinationer
- Konstant spänning eller konstant strömoperation: Automatisk begränsning till förinställda värden
- IEEE 488.2 GPIB-gränssnitt: Manuell eller buskontroll med högupplösningsprogrammering
- Fjärrgivning: Upprätthåller reglering vid lasten över avstånd upp till 0,5V drop per ledare
- Master/Slave-operation: Upp till fyra enheter kan anslutas för ökad effekt eller spänning
- Digitala LED-panelmätare: Realtids spännings- och strömvisning med indikatorer
- Rack-monterbar design: Kompakt switchmode-topologi för systemintegration
- Spänningssteg: 20mV, Strömsteg: 50mA
Tillämpningar
- Bänkprövning och utrustningsutveckling
- Systemintegration och automatisering
- Laboratorieskraftförsörjning för F&U
- Produktprövning och validering
Specifikationer
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP60-150 | 20mV50mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP60-150 | 0-60V/0-150A |
Begär en offert
Farnell AP60-150 Autoranging kraftförsörjning
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt