Farnell AP100-30 autoranging DC-strömförsörjning
Farnell AP100-30 Autoranging DC Power Supply
Begär en offert
Farnell AP100-30 är en 1 kW autoranging DC-strömförsörjning med 0–100 V / 0–30 A utgång, konstant spänning/strömlägen och GPIB fjärrkontroll.
Produktinformation
| Modell | AP100-30 |
| Tillverkare | Farnell |
| Kategori | Strömförsyningar och elektroniska belastningar |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Översikt
Farnell AP100-30 är en 1 kW autoranging DC-strömförsörjning med ett unikt autoranging-koncept som ger ett brett och justerbart spännings- och strömkombinationsomfång inom dess konstanta effekthölje. Denna flexibla design gör den idealisk för både bänk- och systemapplikationer, ofta uppfyllande nuvarande och framtida krav med ett enda instrument.
Huvudfunktioner
- 1 kW effekthölje med 0–100 V / 0–30 A utgångsomfång
- Autoranging spännings- och strömkombinationer
- Konstant spänning eller konstant strömtilloppslägen
- Spänningssteg: 25 mV, programmeringsnoggrannhet: 0,2% + 0,13% f.s.
- Strömsteg: 10 mA, programmeringsnoggrannhet: 1,1% + 0,13% f.s.
- Manuell kontroll eller IEEE 488.2 (GPIB) fjärrseende
- Digitala LED-panelmätare och statusindikatorer
- Fjärr sensning-möjlighet (upp till 0,5 V droppkompensation per ledare)
- Huvudslav-operation för ökad effekt eller spänning
- Rackmonterad hölje
Tillämpningar
- Bänkströmförsörjning för utveckling och prototyping
- Systemintegrering för automatiserad testequipment
- Komponent- och delsystemtestning som kräver stabil strömförsörjning
- Lasttestning och produktvalidering
Specifikationer
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP100-30 | 25mV10mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP100-30 | 0-100V/0-30A |
Begär en offert
Farnell AP100-30 autoranging DC-strömförsörjning
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt