Fujikura 90S+ kärnstod fusionssplicare
Fujikura 90S+ Core Alignment Fusion Splicer
Begär en offert
Fujikura 90S+ avancerad fusionssplicare med 50% snabbare drift, 7–9 sekunders FAST mode splice-tid, Active Fusion Control-teknik och 0.02dB genomsnittlig splice-förlust.
Produktinformation
| Modell | 90S+ (S017521) |
| Tillverkare | Fujikura |
| Kategori | Nätverk- och fiberoptisk testning |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Översikt
Fujikura 90S+ är en avancerad kärnstod fusionssplicare som löser vanliga fältproblem, från splicing av dålig kvalitet arvsfiber till automatiserad enhetsvård. Med betydande förbättringar jämfört med tidigare modeller, inklusive 50% minskning av drifttiden, är 90S+ lämplig för flera fältsplic-program inklusive böjkänsliga fibrer i dropkablar, långväga terrestrisk och sjövägfibrer, lös buffertfiber och splice-på kontakter.
Huvudfunktioner
- Automatisk öppen/stäng vindskyddning för snabbare automatiserad drift utan operatör rörtning
- Fiberkläm för förlust som stöder automatiserad drift och förhindrar fiber förskjutning
- Optimerad försäljningsband positioneringssystem möjliggör snabbare skydds hylsa centrering
- 50% drifttidsreduktion jämfört med tidigare modeller
- Active Fusion Control by Cleave Condition analyserar ändansiktskvalitet för förbättrad splice-förlust
- Active Fusion Control by Fiber Brightness säkerställer stabil splice-prestanda under varierande förhållanden
- Active Fusion Control by Fiber Discrimination med automatisk parameteroptimering
- Active Blade Management Technology med stöd för dubbel CT50 cleaver och trådlös anslutning
- Verktygsöskjutande elektroder med förbättrad belysningsdesign för bättre synlighet
- Multi-funktions bärväska med arbetsbrickor och förvaringslådor
- Högkapacitets litiumjon-batteri stöder upp till 300 splices
Program
- Höghastighetsfiberoptisk nätverksinstallation och fältplicing
- Böjkänslig fiberplicing i dropkablar
- Långväga terrestrisk och sjöväg kabelinstallation
- Lös buffert rör fiberplicing
- Splice-på kopplare program
- Produktion och specialmiljöer som kräver höga utmatningar och tätt packning
Inkluderade tillbehör
- Kärnstod fusionssplicare enhet med 4.9 tums pekskärmsskärm
- Uppladdningsbart litiumjon-batteripaket
- AC-adapter
- Multi-funktions bärväska med arbetsbrickor
- Optisk fibercleavre (CT50)
- Reservelektroder och tillbehör
Specifikationer
| Automatic Open-Close Wind Protectors | The faster automated features of the 90S+ fusion splicer reduce installation times. With this splicer, an operator can complete the entire splice process from splicing to heating without touching the 90S+ and only moving the fiber. |
| Operation Time Reduction | The shape of the sheath clamp is optimized for 60mm length protection sleeves. The length from splice point to the edge of the sheath clamp is 30mm. Therefore, it is easy to center the protection sleeve over the splice by using your fingers to reference the splice point. |
| Fiber Retention Clamp | The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out. The retention clamps release when the fiber is lifted by the operator. |
| Operation Time Reduction | These functions enable the 90S+ fusion splicer to reduce operation time by 50% over the previous model. |
| Carrying Case | There are multiple ways to utilize the 90S+ fusion splicer carrying case. The 90S+ fusion splicer is ready to use just by opening the case, but it is also possible to use the 90S+ fusion splicer on top of the carrying case or only with the work tray depending on the work environment. |
| Work Tray | The work tray has many functions. There are two drawers for storage, and the drawers are large enough to store tools or battery packs. Also, the work tray can be divided in two, so it is configurable to fit your work space. |
| Loose Tube Compatibility | The sheath clamp of the 90S+ fusion splicer is compatible with loose tube fiber. The Protrusion part on of the sheath clamp for loose tube fiber engages or retracts by simply changing the switch position with your finger. |
| Tool-Less Electrodes and Illumination | The 90S+ fusion splicer electrodes come as an “assy” including the fixing screw. You can rotate the screw by hand without tools, enabling easy electrode replacement. The transparent electrode covers support wider illumination of the v-groove. As the sheath clamp opens on the opposite side of the illumination lamp, the sheath clamp area is illuminated without shadow. |
| Active Fusion Control by Cleave Condition | One of main causes of high splice loss is bad cleave end face. The 90S+ fusion splicer analyzes the condition of both L and R cleave end faces and performs optimal fusion control. This new technology improves splice loss significantly and reduces the risk of re-installation. |
| Active Fusion Control by Fiber Brightness | Fusion is easily affected by changes in the environment. The 90S+ fusion splicer uses real-time fusion parameter control by analyzing the fiber’s brightness intensity during fusion. It contributes to stable, reduced splice loss. |
| Active Fusion Control by Fiber Discrimination | Adequate splice parameters may differ depending on fiber type. The 90S+ fusion splicer automatically applies the optimum splice parameters depending on the fiber type. |
| Active Blade Rotation by Motor | The 90S+ fusion splicer and CT50 fiber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the 90S+ fusion splicer judges the blade is worn. The 90S+ fusion splicer can connect to two CT50s simultaneously. |
| Active Blade Life Management | The 90S+ fusion splicer displays the remaining blade life and informs the user when a blade height change, position change, or new blade is required. |
| Features | Parameters |
| Fiber Alignment Method | Active core alignment |
| Fiber Count can be Spliced | Single fiber |
| Fiber Tensile Test Force | Approx. 2.0N |
| Electrode Life *5 | Approx. 5000 splices |
| Screw Hole for Tripod | 1/4-20UNC |
Begär en offert
Fujikura 90S+ kärnstod fusionssplicare
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt