EXFO SPSB-B-1000-88-104 Enmodsstartkabel
EXFO SPSB-B-1000-88-104 Singlemode Launch Test Cable
Begär en offert
EXFO SPSB-B-1000-88-104 är en 1000m enmodsstartkabel med SC/APC och LC/APC-kontakter för eliminering av OTDR död zon.
Produktinformation
| Modell | SPSB-B-1000-88-104 |
| Tillverkare | EXFO |
| Kategori | Nätverk- och fiberoptisk testning |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Överblick
EXFO SPSB-B-1000-88-104 är en portabel startkabel som används med optiska tidsdomän-reflektometrar (OTDR:er) för exakt fiberkaraktärisering. Denna 1000m enmodskabel täcker OTDR:ns död zon, vilket möjliggör precis förlustmätning vid fiberanslutningar som annars skulle vara omätbara.
Huvudfunktioner
- 1000m enmodsfibrer (9/125 µm)
- SC/APC (88) och LC/APC (104) kontakter
- Kontaktinsättningsförlust mindre än 0.5 dB
- Kontaktreflektans mindre än −60 dB (APC)
- Portabel mjuk bärväska design
- Möjliggör förlustmätning på första och sista fiberanslutning
- Minskar antalet OTDR-kontaktanslutningstillfällen för att förlänga apparaturens livslängd
- Brett urval av kontaktalternativ tillgängligt i denna produktfamilj
Tillämpningar
- OTDR-fiberkaraktärisering och nätverksidrifttagning
- Installation och felsökning av fiberförbindelser
- Förlustmätning på kritiska fiberanslutningar
- Kvalitetskontrollprövning av fibernätverk och förbindelser
Specifikationer
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-1000 | Soft pulse suppressor bag, singlemode fiber 9/125, 1000 m |
| 88 | SC/APC narrow key |
| 104 | LC/APC |
Begär en offert
EXFO SPSB-B-1000-88-104 Enmodsstartkabel
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt