Rohde & Schwarz LCX200COM Digital LCR-mätare-paket
Rohde & Schwarz LCX200COM Digital LCR Meter Bundle
Begär en offert
Rohde & Schwarz LCX200COM är ett omfattande LCR-mätarepaket med 10 MHz frekvensomfattning, avancerade analysfunktioner, sorteringsalternativ och utökad DC-förspänning.
Produktinformation
| Modell | LCX200COM (3629.8856P99) |
| Tillverkare | Rohde & Schwarz |
| Kategori | LCR- och impedansmätare |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Översikt
Rohde & Schwarz LCX200COM är ett omfattande LCR-mätarepaket som kombinerar LCX200-basenheten med förkonfigurerade alternativ utformade för krävande produktions- och forskningsapplikationer. Det inkluderar frekvensuppgradering till 10 MHz, avancerade analysfunktioner, sorteringsförmågor och utökad DC-förspänning, vilket ger maximal mätomfattning och hastighet.
Huvudfunktioner
- Frekvensomfattning från DC till 10 MHz (förkonfigurerad uppgradering)
- Grundläggande noggrannhet på ±0,05% för impedansmätningar
- Grundläggande noggrannhet på ±0,03° för fasmätningar
- Utökad DC-förspänningsspänning upp till 40 V
- Avancerade analysfunktioner för omfattande testning
- Sorteringsalternativ för automatiserad sortering och testning
- Dataloggningsfunktion med upp till 10 sampel per sekund
- Flera mätningstider: Snabb (≤15ms), Medium (≤100ms), Långsam (≤500ms)
- Valbar utgångsimpedans på 100Ω eller 10Ω
Tillämpningar
- Höghastig produktionstestning med automatiserad sortering och klassificering
- Avancerad materialkaraktärisering över brett frekvensomfattning
- Komponentvalidering och kvalitetsäkerhet inom tillverkning
- Forskningsapplikationer som kräver omfattande impedansanalys
Specifikationer
| Selectable Frequency Range | All LCX models measure under DC conditions. The AC range already begins at 4Hz. The upper frequency limit on the LCX100 is 300kHz. In its base configuration, the LCX200 is designed for a maximum frequency of 500kHz; this frequency limit can, however, be extended to 1MHz or 10MHz. This means that the ideal instrument is available for any given application and budget. |
| Fast, Accurate and Versatile | Both LCX models combine high measurement speed, accuracy and versatile measurement capabilities. This makes them ideal for standard measurements in development, for material analysis in research as well as for fast production testing. With their broad measurement ranges, they also cover applications with extremely low and extremely high impedances. Three measurement times are available: Fast: ≤ 15ms Medium: ≤ 100ms Slow: ≤ 500ms The basic accuracy for impedance measurements is ±0.05%. and for phase measurements ±0.03° |
| Test Signals for all Requirements | Test signals can be generated from 100mV to 10V and deliver a current of up to 200mA. The instruments have a selectable output impedance of 100Ω or 10Ω. The actual current flow and the voltage applied and measured using the monitor function. |
| DC Bias | In many applications an adjustable DC bias is needed to measure C and L components at different operation points. The LCX100 and LCX200 generate a DC bias voltage of up to 10V. As an option, it is also possible to set a DC bias current (up to 200mA). DC bias voltages of up to 40V can be applied at an external connection on the rear panel (LCX-K108 option) using a standard DC power supply for example an NGA. |
| Data Logging Function | Th LCX LCR meters provide a fast logging function for recording all measured values. The data can be saved on an external USB flash drive or transferred to an external PC via USB or LAN. With a data rate of up to 10 sample/s, the measured values are available every 100ms. |
| Test Signal Frequency | DC, 4 Hz to 300 kHzDC, 4 Hz to 10 MHz (option) |
| Test Signal Voltage | 100 mV to 10 V< 1 MHz: 100 mV to 10 V > 1 MHz: 100 mV to 2 V |
| DC bias Voltage (internal) | 0 V to +10 V0 V to +10 V |
| DC bias Current (internal) | 0 mA to 200 mA0 mA to 200 mA |
| External DC bias Voltage, Input | 0 V to +40 V0 V to +40 V |
| Source Impedance | 100 Ω, 10 Ω100 Ω, 10 Ω |
| Measurement Range | 100 mΩ to 100 MΩ100 mΩ to 100 MΩ |
| Basic Accuracy for Impedance Measurements | 0.05 %0.05 % |
| LCX200 | 3629.8856.03Cp, Cs, Lp, Ls, D, Q, G, Rp, Rs, Rdc, R, X, Z, Y, Θd, Θr, B, M, N DC, 4 Hz to 500 kHz (1 MHz or 10 MHz optional) ≤ 1 MHz: 100 mV to 10 V ≤ 5 MHz: 100 mV to 2 V > 5 MHz: 100 mV to 1 V ≤ 1 MHz: 1 mA to 100 mA > 1 MHz to ≤ 5 MHz: 1 mA to 20 mA > 5 MHz: 1 mA to 10 mA 0 V - 10 V |
| LCX200 | 3629.8856.03LCR meter, 500 kHz |
Begär en offert
Rohde & Schwarz LCX200COM Digital LCR-mätare-paket
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt