Fluke 5500A Multikalibreringsinstrument
Fluke 5500A Multi-Product Calibrator
Begär en offert
Fluke 5500A multikalibreringsinstrument för spänning, ström, resistans, effekt och temperatur med oscilloskopkalibreringsalternativ upp till 600 MHz.
Produktinformation
| Modell | 5500A |
| Tillverkare | Fluke |
| Kategori | Elektriska Kalibratorer |
| Tillgänglighet | Tillverkas på beställning |
Beskrivning
Översikt
Fluke 5500A är ett mångsidigt elektriskt kalibreringsinstrument utformat för att möta ett brett spektrum av kalibreringsmöjligheter. Det tillhandahåller direkt- och växelspänning och ström med flera vågformer, simulerar effekt med fasvridning och kan tillhandahålla motstånd-, kapacitans- och temperatursignaler från termoelement och motståndstermometrar. 5500A:s oscilloskopkalibreringsalternativ tillhandahåller nivåsinusvåg, snabb flank, tidsmarkering och amplitudsignaler för oscilloskopkalibrering upp till 600 MHz.
Huvudfunktioner
- DC-spänningsintervall 0 till ±1020V med ±50 ppm noggrannhet
- DC-strömintervall 0 till ±11A med ±0,01 % noggrannhet
- AC-spänning 1 mV till 1020V (10 Hz till 500 kHz) med ±0,03 % noggrannhet
- AC-ström 29 mA till 11A (10 Hz till 10 kHz) med ±0,06 % noggrannhet
- Motståndskälla 0 till 3,29 MΩ med ±0,009 % noggrannhet
- Kapacitanskälla 0,33 nF till 1,1 mF med ±0,25 % noggrannhet
- Termoelementsimulering -250°C till +2316°C (11 typer)
- RTD-källa -200°C till +630°C (8 typer)
- DC och AC effektkällor upp till 11 kW med ±0,08 % till ±0,15 % noggrannhet
- Fasvridning 0 till ±179,99° med ±0,15° noggrannhet
- Frekvensomfång 0,01 Hz till 2,0 MHz med ±25 ppm noggrannhet
- IEEE-488 (GPIB), RS-232 och valfri 5725A gränssnitt
- Oscilloskopkalibreringsalternativ för 300 MHz och 600 MHz instrument
Tillämpningar
- Kalibrering av portabla och bänkmultimetrar
- Oscilloskop och ScopeMeter testverktyg kalibrering
- Wattmätare och effektanalysatorkalibrering
- Termoelement- och RTD-termometerkalibrering
- Dataloggare och bandskrivarkalibrering
- Processkalibreringsinstrument och strömtångkalibrering
- Allmän elektrisk instrumentkalibrering och verifiering
Specifikationer
| Features | Parameters |
| Voltage DC | Range: 0 to ±1020V Best 1 Year Specification: ±50 ppm of setting |
| Current DC | Range: 0 to ±11A Best 1 Year Specification: ±0.01% of setting |
| Resistance | Range: 0 to 3.29.999 MΩ Best 1 Year Specification: ±0.009% of setting |
| Voltage AC | Range: 1 mV to 1020V 10 Hz to 500 kHz, Sine Best 1 Year Specification: ±0.03% of setting |
| Current AC | Range: 29 m A to 11A 10 Hz to 10 kHz, Sine Best 1 Year Specification: ±0.06% of setting |
| Capacitance | Range: 0.33 nF to 1.1 mF Best 1 Year Specification: ±0.25% of setting |
| RTD Source | Range: -200°C to +630°C (8 types) Best 1 Year Specification: ±0.03°C of setting |
| DC Power | Range: 109 mW to 11 kW Best 1 Year Specification: ± 0.08% of setting |
| AC Power | Range: 109 mW to 11 kW 45-65 Hz, PF=1 Best 1 Year Specification: ± 0.15% of setting |
| Phase | Range: 0 to ± 179.99° Best 1 Year Specification: ±0.15° |
| Frequency | Range: 0.01 Hz to 2.0 MHz Best 1 Year Specification: ±25 ppm of setting |
| Warm up Time | Twice the time since last warmed up, to a maximum of 30 minutes |
| Settling Time | Less than 5 seconds for all functions and ranges except as noted |
| Standard Interfaces | IEEE-488 (GPIB), RS-232, 5725A (5500A only) |
| Temperature Performance | Operating: 0°C to 50°C Calibration: (tcal): 15°C to 35°C Storage: -20°C to 70°C |
| Temperature Coefficient | Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C |
| Relative Humidity | Operating: < 80% to 30°C, < 70% to 40°C, < 40% to 50°C Storage: < 95%, non-condensing |
| Altitude | Operating: 3,050m (10,000 ft) maximum Non-operating: 12,200m (40,000 ft) maximum |
| Safety | Designed to comply with: IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-C22.2 No. 1010.1-92 |
| Analog Low Isolation | 20V |
| EMC | Designed to comply with FCC Rules Part 15 |
| Line Power | Line Voltage (selectable): 100V, 120V, 220V, 240V Line Frequency: 47 to 63 Hz Line Voltage Variation: ± 10% about line voltage setting |
| Power Consumption | 300 VA |
| Calibration Documentation | 17025 accredited report of calibration included |
| Dimensions | Height: 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit Width: 43.2 cm (17 in), standard rack width Depth: 47.3 cm (18.6 in) overall |
| Weight (without options) | 20 kg (44 lbs.) |
| Absolute Uncertainty Definition | 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated. |
| Specification Confidence Interval | > 99% |
| 5500A | Multi-Product Calibrator |
Begär en offert
Fluke 5500A Multikalibreringsinstrument
Svar inom 24 timmar
Inga förpliktelser
Direkt kontakt